Product List

IMBIWET SD

Excellent wetting agent with high deaerating action: highly effective, especially on raw materials. Good stability in a strongly alkaline pH; suitable in pretreatment, dyeing, finishing and coating processes.

Ionic Charge

Non Ionic - Anionic

Certifications

IMBIWET SD is a wetting agent with deaerating properties that can be used in all continuous or discontinuous pretreatment and dyeing processes (except with vat dyes); the product is also suitable for finishing treatments by impregnation or coating, to improve the adhesion of pastes on waterproofed articles. It is not suitable for foam coatings.
Used in pre-treatment cycles, it is stable and effective throughout the whole pH range, in the presence of oxidants or reducing agents and is compatible with enzymes; it can be used in all scouring and bleaching processes in the pad-batch and pad-steam processes of cellulosic and blends, as well as in all the desizing and scouring processes of synthetic fiber.
It has an excellent wetting power which makes it effective in the treatment of very heavy and slightly hydrophilic articles; it allows to wet completely and quickly even raw cotton fabrics.
IMBIWET SD has a high deaerating power that allows to contain the development of foam in all processes and to facilitate the elimination of air inside the fibers: in this way the penetration of the treatment baths is favored, a particularly useful condition in exhaustion treatments.
IMBIWET SD is particularly effective in impregnation finishing treatments and can be used in combination with most finishing products, including fluorocarbon resins or Fluoro Free waterproofing (SOFTGARD).
In coating recipes, it favors the introduction of fillers into formulations, acts as an antifoam and allows the paste to better wet the articles, especially if pre-waterproofed.
The product cannot be used in contact with PVC components.


Warning: All the statements, recommendations and technical details provided herein are based on our best knowledge and expertise that we consider reliable. As a consequence, they should be meant for reference purposes only and adapted to suit specific situations. They are not binding, including with a view to third-party manufacturing rights. It is the user's exclusive responsibility and duty to make their own investigations to determine the suitability of products to their actual conditions of use. Product application, use and processing therefore fall within the user's full responsibility.

Related Products

  • IDROFOB WR NEW-P

    Fluorine Free waterproofing for good repellency effects; improves air permeability and good fastness to launderings.

  • SMARTGARD C6 L

    Fluorocarbon resin - C6 chain - for high water and oil repellency performance on all fibres.

  • SMARTGARD HC

    Fluorocarbon resin - C6 chain with high fluorine content. Very high water and oil repellency performance and excellent stability in application baths.

  • SMARTGARD IMT

    Fluorocarbon resin - C6 chain - for high water and, above all, oil repellency performance. High stability in application baths.

  • SOFTGARD / SMARTGARD NFD

    Fluorine Free waterproofing for high repellency effects; improves air permeability, excellent fastness to washings.

  • SOFTGARD C6-3M

    Fluorocarbon resin - C6 chain - for high water and oil repellency performance and high stability in application baths.

  • SOFTGARD C6-BO

    Fluorocarbon resin - C6 chain - for high water and, aboveall, oil repellency performance. High stability in application baths.

  • SOFTGARD CADS-20

    Fluorocarbon resin - C6 chain - for high water and good oil repellency performance. High stability in application baths.

  • SOFTGARD FFA

    Fluorine Free waterproofing for high repellency effects with excellent fastness to launderings; improves air permeability.

  • SOFTGARD FFM

    Fluorine Free waterproofing for high repellency effects; improves air permeability, excellent fastness to launderings and good to dry cleaning.

  • SOFTGARD MDS

    Fluorocarbon resin - C6 chain - with good repellency performance, specific for use in combination with resins in coating compounds.

  • SOFTGARD TZO

    Fluorocarbon resin - C6 chain - for high water and oil repellency performance and high stability in application baths.

Soft Chemicals
  • ph +39 0331 369 378/379
  • fax +39 0331 606 055
  • info@softchems.com
Certifications
Certifications